defroster control question...
Thread Starter
|
New User
Joined: Jan 2001
Posts: 4
Likes: 0
defroster control question...
As I unscrewed the last screw to the cover of heater assembly (in order to change the heater core), a mysterious bracket flew out. I put everything back together minus the bracket and now I cannot get air to blow up the defroster ducts. The screw was the farthest one on the left on the bottom edge of the cover. Does anyone know where this bracket goes?
Thanks,
Dave Emmert
1970 F100 - rusty, but paid for
Thanks,
Dave Emmert
1970 F100 - rusty, but paid for
Posting Guru
Joined: Jul 1999
Posts: 1,558
Likes: 0
From: Inthepast
defroster control question...
[FONT COLOR="#0000ff" SIZE="3" FACE="Veranda"]
I hate to have to be the one to break the news to you Dave, but your going to need to pull the heater box again. I believe your flapper that diverts the air is what fell out. Now that you know you have this problem, it should be something you can figure out with the box off. The operating principle of the box is very straight forward. Let us know.
[LINK:www.hometown.aol.com/tbeeee|http://members.aol.com/tbeeee/page/registrysig.gif]
I hate to have to be the one to break the news to you Dave, but your going to need to pull the heater box again. I believe your flapper that diverts the air is what fell out. Now that you know you have this problem, it should be something you can figure out with the box off. The operating principle of the box is very straight forward. Let us know.
[LINK:www.hometown.aol.com/tbeeee|http://members.aol.com/tbeeee/page/registrysig.gif]
Thread
Thread Starter
Forum
Replies
Last Post
fordbigtruck
1947 and Older Ford Trucks
2
Jan 24, 2002 08:24 PM
