4x4 Front Spindle puller
#1
4x4 Front Spindle puller
I used an old hub wrench and an old wheel bearing lock nut to make a hub puller for my truck. I welded the lock nut to the hub wrench, drilled out the other end of the hub wrench and welded a 1/2" fine thread nut on that end and ran a long bolt through the nut. Pulls the spindle off with no hassel.
Thread
Thread Starter
Forum
Replies
Last Post
camodown
1999 - 2003 7.3L Power Stroke Diesel
131
11-03-2020 09:10 AM
waylen89
1987 - 1996 F150 & Larger F-Series Trucks
12
09-15-2016 09:50 PM
zxwut?
1987 - 1996 F150 & Larger F-Series Trucks
33
01-04-2016 12:00 PM
BallinrobeBill
1987 - 1996 F150 & Larger F-Series Trucks
7
11-13-2012 01:39 AM
jackyoung
1987 - 1996 F150 & Larger F-Series Trucks
9
06-07-2011 01:45 PM