Blue Point Multimeter MT 596A need software
Posting Legend
Joined: Sep 2001
Posts: 30,255
Likes: 37
Brian, have you checked with the manufacturer?
Floppy drives are so seldom used they tend to collect dust from the system fans drawing air thru the case. The dust will prevent a disk from being read as well as transfer dust inside the floppy sleeve when a disk is inserted. It is best to always blow out a floppy drive b4 you use them. I am not sure but a little gentle air from one of those "air cans" may help clear the dust from a floppy disk. If the disk is "dead" it can't hurt anything to try...
Floppy drives are so seldom used they tend to collect dust from the system fans drawing air thru the case. The dust will prevent a disk from being read as well as transfer dust inside the floppy sleeve when a disk is inserted. It is best to always blow out a floppy drive b4 you use them. I am not sure but a little gentle air from one of those "air cans" may help clear the dust from a floppy disk. If the disk is "dead" it can't hurt anything to try...
1st Gear
Joined: Mar 2023
Posts: 1
Likes: 0
MT596A software
I have a working copy of software I have it installed on old do pro machine I have floppy so I could send you a copy if you want I am in Burton on Trent England Beer capital of the world I could email you file as attachment or snail mail you a hard copy best wishes 🏁🏁👍
Thread
Thread Starter
Forum
Replies
Last Post
BEAVER
1973 - 1979 F-100 & Larger F-Series Trucks
4
Sep 22, 2002 09:38 PM
