Blue Point Multimeter MT 596A need software
I need the software for this meter to interface it to the computer.
Apparently my 3.5" drive has gone bad or the floppy has. Thanks :) |
Brian, have you checked with the manufacturer?
Floppy drives are so seldom used they tend to collect dust from the system fans drawing air thru the case. The dust will prevent a disk from being read as well as transfer dust inside the floppy sleeve when a disk is inserted. It is best to always blow out a floppy drive b4 you use them. I am not sure but a little gentle air from one of those "air cans" may help clear the dust from a floppy disk. If the disk is "dead" it can't hurt anything to try... |
I skimmed through there website and didn't find any online for it, but I am going to e-mail them and see if I can get it that way.
|
MT596A software
I have a working copy of software I have it installed on old do pro machine I have floppy so I could send you a copy if you want I am in Burton on Trent England Beer capital of the world I could email you file as attachment or snail mail you a hard copy best wishes 🏁🏁👍
|
All times are GMT -5. The time now is 10:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands