Got my Cam...
Thread Starter
|
Elder User
Joined: Feb 2000
Posts: 775
Likes: 0
From: Temperance,MI
Got my Cam...
Hey guys, been busy got my cam about a week ago figured I would give you guys some specs.
I get my cams from Company called CamCraft Cams give him all my specs and builds a cam for what I'm doing. Duration In.256, Ex264:@.050, 206, 214, Cam Lift .280, .293, Valve lift .484, .506, Lobe seperation 112degree, IN open -4 BTDC close 30 ABDC,EX open 44 BBDC, close -10 ATDC. What do you guys think? Rest of my set up, Edelbrock performer EGR intake, stock style heads, Badger flat tops, Flow tech headers, 2 1/2" exhaust Yed into 1 and back out 2.
The to do list EFI, ZF 5speed and BW1356tcase so with it on 33s and for now 3.50 gears shoulden't have a problem moving along.
Thanks
Curtis
I get my cams from Company called CamCraft Cams give him all my specs and builds a cam for what I'm doing. Duration In.256, Ex264:@.050, 206, 214, Cam Lift .280, .293, Valve lift .484, .506, Lobe seperation 112degree, IN open -4 BTDC close 30 ABDC,EX open 44 BBDC, close -10 ATDC. What do you guys think? Rest of my set up, Edelbrock performer EGR intake, stock style heads, Badger flat tops, Flow tech headers, 2 1/2" exhaust Yed into 1 and back out 2.
The to do list EFI, ZF 5speed and BW1356tcase so with it on 33s and for now 3.50 gears shoulden't have a problem moving along.
Thanks
Curtis
Last edited by 77_F150_4x4; Feb 28, 2006 at 11:08 PM.
