Check Enging light replacement
Thread Starter
|
New User
Joined: Oct 2005
Posts: 12
Likes: 0
Check Enging light replacement
I was just down at the DMV to get an emissions test on my 01 F-150 and was failed because my check engine light bulb was burnt out and failed to come on. Anyone have any advice on how to get back there to change it. I have absolutely no idea where to start......thanks
Junior User
Joined: Dec 2005
Posts: 68
Likes: 0
You will have to remove the instrument cluster. There are several blubs located on the back of the cluster. They will have a white plastic backing and you will unscrew them by turning the bulb holder counter-clockwise. Might as well replace all the blubs while you are back there.
I can post more detailed instructions if needed. A Haynes manual will have step by step. Wise $15 investment for little projects like this.
I can post more detailed instructions if needed. A Haynes manual will have step by step. Wise $15 investment for little projects like this.
