build
Thread Starter
|
Junior User
Joined: Sep 2004
Posts: 73
Likes: 0
build
Ok guys, i really need your help on this one, i'm building on a 302EFI that i have in my truck its a 95 with a A4OD-W. I already have the cam that i want and maybe the intake manifold. I've chosen the CompCam 268h and all the hardware(springs, lifters, locks, etc) So, first off i'm just wanting to know if that's a good choice for what i'm doing. The intake manifold i found is an Edelbrock Performer 5.0EFI. The engine itself has about 130000 miles on it, so nothing TOO extreme, it sill runs like a beast and i know it can do so much more.
Some other mods i was wanting to make are MSD Ignition and of course wires and distribuitior, i was looking into some exhaust headers also. I'm wanting to beef up the rear end too, i'm afraid to do that by myself...i've heard some horror stories about that...but i would still like some input on that as well so i can get what i need and have someone help or do it for me. I was thinking also about a K&N Filter, but i heard that these aren't all what everyone says they are.
So guys, any help will be appriciated, as always is....thanks in advance!!!!
Some other mods i was wanting to make are MSD Ignition and of course wires and distribuitior, i was looking into some exhaust headers also. I'm wanting to beef up the rear end too, i'm afraid to do that by myself...i've heard some horror stories about that...but i would still like some input on that as well so i can get what i need and have someone help or do it for me. I was thinking also about a K&N Filter, but i heard that these aren't all what everyone says they are.
So guys, any help will be appriciated, as always is....thanks in advance!!!!
