When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hope I don't bore all of you, but we made good progress today on our project. Here are some more pics.
The doors, fenders, hood all got cut in today. The cab got primed. Tomorrow, the windshield and rear window go in & hopefully we will get to shoot some paint on it by the end of the week. We are finishing up welding the bedsides on tonight if the caffeine holds out !
Not really Steve. It's the little things taht add up and take so much time. I want to put a new radiator in it, have a few electrical issues to finish & pull the brakes down again & check them out after all the dust, sand etc... that has been sprayed near them. Hoppefully by the end of March.
Sweet, you'll let me come over and drool over it right? From a safe distance I mean
I keep putting mine off becuase I want to throw a D60 under the front, but its just so exspensive Its getting to the point that I want to have fun and get it done to drive on the D44 and just save and swap next year
Even then I still need some good weekends to pressure wash the axle housing and prep and paint it. . .I'm looking at your truck and I'm thinking I can stand out side scrubbing in raining freezing weather
MAN, just looking at your truck i want to go outside and sit on my frame and pretend I'm driving!@
Let me know. Bring the axle over & I have a steam cleaner that will make short work of that task. Then we could shoot some primer on it & move you along !
Here is yesterdays progress, got the windshield, back glass in & we are hanging the doors, fenders & front end stuff today.
We were playing around with an old International bumper and stuck that on the front end. Just cut it down a little and spend some time polishing & it may just work.