Warn hubs different depth
Laughing Gas
Joined: Jan 2005
Posts: 920
Likes: 7
From: Mazon, IL
Made a part
Okay guys, I made a filler piece today. All I did was take a piece of 4" PVC pipe, I put a bevel in the end of it, so it would seat on the hub. It won't stay on by itself, the bevel keeps it seated so it doesn't slide sideways. I then cuy it to 1" long. Sanded and painted the inside of the pipe with some silver metallic paint, and when I put the hubcap back on, the hubcap held it all in place. There is still a little bit of room for crap to collect, but the whole cap won't fill up with snow. I don't think it's any worse than whar the dually guys deal with. I started my photo gallery with pictures of the whole thing. I hope this helps some of you out there like these forums have helped me in the past. Good luck, Posse out!!
