hazard flasher unit
Thread Starter
|
Freshman User
Joined: Sep 2005
Posts: 46
Likes: 0
hazard flasher unit
i know that this has been posted before but i cannot find the thread. I have a 1995 F250 5speed 4X4 with a 460 in it. My hazards dont work and i believe that it is the flasher unit but i cannot seem to find it. Ive looked both behind the fuse block and behind the glovebox. so any help would be greatly appreciated. Thanks again
Post Fiend
Joined: May 2004
Posts: 11,289
Likes: 6
From: Lakewood, Ohio
it is directly on the other side by signal flasher.
look again.
i am looking at the picture in the ford manual, it is where i said it is.
look again.
i am looking at the picture in the ford manual, it is where i said it is.
Last edited by quicklook2; Feb 14, 2006 at 07:03 PM.
Thread Starter
|
Freshman User
Joined: Sep 2005
Posts: 46
Likes: 0
ok. i found where the unit is supposed to be but there was no flasher unit in it. so i took the one for the turn signals and put it in place of the hazard unit but still got no hazards. do you have to have both in for the hazards to work or is this a problem with the switch as well. thanks for the advice.
