holley Pro-jection
Thread Starter
|
New User
Joined: Dec 2005
Posts: 10
Likes: 0
holley Pro-jection
Greetings,
I just recently aquired a 1974 Bronco with a 302 engine. The previous owner installed a Holley pro-jection system. I've been playing with it a bit, trying to understand it. The Bronco is running rich. It likes to blow out black smoke on start up, it is hard to start up when warm, and there is a strong gas odor.
Any of you have any tips on getting this thing adjusted correctley? I am about ready to take it off and put in a good quality two barrel carb.
Ed
I just recently aquired a 1974 Bronco with a 302 engine. The previous owner installed a Holley pro-jection system. I've been playing with it a bit, trying to understand it. The Bronco is running rich. It likes to blow out black smoke on start up, it is hard to start up when warm, and there is a strong gas odor.
Any of you have any tips on getting this thing adjusted correctley? I am about ready to take it off and put in a good quality two barrel carb.
Ed
Moderator
Joined: Dec 2001
Posts: 22,436
Likes: 17
From: Louisville,Ky.
Deson't it have all of the adjustments in the cab for the mixtures? I have only seen one, it was on a 69 Mustang. You could have a leaking injector. Look for fuel dripping into the intake whan the engine is off.
