hello all !!!
I haven't had much time to work on it so it has sat in my back yard (much to the ole lady's dismay)
for the past 7 mos. Well, today i decided to start it and get it closer to the garage to weld, but it wouldnt start.I took off the distributor wire to see if there was spark (and there is) I also checked to see if there was pressure in the line with the valve in the line (and there is). There are no blown fuses, and no smell of fuel.
any ideas ????? thanks in advance
We are happy to have you! There is a ton of great info on this site. But, before you go snooping around there are a few things you need to do first.
1) Want to meet or talk to other members in your area? There are Provincial, State and International Chapters located near the bottom of the main forum page.
2) Before you post a thread asking a question be especially aware of where (what forum) to place it in. FTE is HUGE! Make sure you read the Read First: at the top of the forum before you go posting.
3) And finally you should review the Guidelines. They will kind of give you an idea of what is and isn't allowed on this site ("The Rules").
And that is it. I hope you enjoy the FTE "Experience"! This is a great place and we have lots of fun while exchanging valuable info. If you have any questions or problems do NOT hesitate to contact me. Just click my username then send me an email.
-Matt



