new lift camber problems
Thread Starter
|
Mountain Pass
Joined: Mar 2005
Posts: 128
Likes: 0
From: arlington tx
new lift camber problems
Want to think everyone here for there help. When I have the no how I will pass it on too. Put a add-a-leaf on last week. Now my camber is off. Going to put ball joints on friday and have an aliment machine there. So can I adjust this. So I won't have to buy drop down brackets. Was only a 2" add-a-leaf.
Post Fiend
Joined: Apr 2004
Posts: 12,835
Likes: 3
From: Silver Lake Dunes, MI
yes it can be adjusted but it will require bushings for the upper ball joint stud to go into. they are not the best set up for adjusting but they don't move once you get them set. any good alignment guy should know how to do it. so i am asuming since you said you will have a alignment machince i figure you will have somebody there that knows how to use it.
anyway a 2 inch will not require the drop bracket but you will be on the upper limit of the recommended range for camber. atleast my truck was when i leveled it and adjusted my alignment.
anyway a 2 inch will not require the drop bracket but you will be on the upper limit of the recommended range for camber. atleast my truck was when i leveled it and adjusted my alignment.
