New Noise????
Thread Starter
|
New User
Joined: Oct 2005
Posts: 22
Likes: 0
From: madera
New Noise????
Ok I got my WW on about two week ago did it on the truck frist time on a diesel wow that was easy, and may I say it is the best sound in the world! 
Anyway yesterday i was going up a really good grade passing everyone and thing 
as i got to the top i asked her for a liitle more to pass the only person left and she did it with ease. Then at the top i hear what sounds like a timmer going off (ding) your done. but the truck keep giong down the road fine no power loss,but there is a HUMMING/WHINNING noise as you acc it get louder but only at higher RPM it is just a little louder than the WW.
Could it cut in a boost boot, trans,????
I want to just Hear WW again!!
Thanx guys for any help.
Anyway yesterday i was going up a really good grade passing everyone and thing as i got to the top i asked her for a liitle more to pass the only person left and she did it with ease. Then at the top i hear what sounds like a timmer going off (ding) your done. but the truck keep giong down the road fine no power loss,but there is a HUMMING/WHINNING noise as you acc it get louder but only at higher RPM it is just a little louder than the WW. Could it cut in a boost boot, trans,????
I want to just Hear WW again!!
Thanx guys for any help.
FTE Leadership Emeritus
Joined: May 2001
Posts: 13,653
Likes: 6
From: Cabot, Arkansas
Ding.....like metal to metal contact?
Might want to pull the intake and check the turbo...make sure there is no contact between the wheels and the housings.
Check everything belt driven too since it's PM dependant....make sure there isn't somethng loose/rubbing.
Might want to pull the intake and check the turbo...make sure there is no contact between the wheels and the housings.
Check everything belt driven too since it's PM dependant....make sure there isn't somethng loose/rubbing.
Posting Guru
Joined: Sep 2002
Posts: 1,897
Likes: 0
From: Northeastern Pa - USA
just maybe, when you gave it that little bit more the compressor blades flexed and rubbed the housing. check the housing bolts and make sure they are all there and the retaining nut for the compressor. I just hate when things go ding and buzzzzzzzzzz....
