R/C Section
#1
#2
i was into R/C before i had my blaster, and then i got a truck. i have a bash-ready revo with mach .26 in it, with about $1100 invested. i have over shot the 55' table top i used for my blaster, and some times it landed on it's wheels, sometimes not. it flipped back over, and kept rolling. i have done a front flip, and a double backflip so far. haven't run either of these in a while- i have a excursion body on it currently, and the rear 1/4 panel is GONE, the huge pipe sticks out 1-2'' past the body.
i also have a Jato, with "only" about $500 invested. let me see if i can dig up some pics.
http://img.photobucket.com/albums/v3...t/119dfdce.jpg
http://img.photobucket.com/albums/v3...t/DSCF1791.jpg
http://img.photobucket.com/albums/v3...t/DSCF1738.jpg
http://img.photobucket.com/albums/v3...t/DSCF1734.jpg
http://img.photobucket.com/albums/v3...t/DSCF1730.jpg
http://img.photobucket.com/albums/v3...t/DSCF1761.jpg
i also have a Jato, with "only" about $500 invested. let me see if i can dig up some pics.
http://img.photobucket.com/albums/v3...t/119dfdce.jpg
http://img.photobucket.com/albums/v3...t/DSCF1791.jpg
http://img.photobucket.com/albums/v3...t/DSCF1738.jpg
http://img.photobucket.com/albums/v3...t/DSCF1734.jpg
http://img.photobucket.com/albums/v3...t/DSCF1730.jpg
http://img.photobucket.com/albums/v3...t/DSCF1761.jpg
#3
#5
box says it is a MGT 4.60 SE by TeamAssociated. All I know is its a big, bad ****, fast R/C truck I hope I dont get hit with the mod bug on this too. I have to many money intesive hobbies as it is, let alone truck and insurance paymets and school My paycheck can only be stretched so far lol.
#7
Trending Topics
#8
Huh?. . .wha was that chris?. . .not really paying attention. . . staring at your avatar
Preppy, Average price is like $500 for a ready to run out of the box truck. Thats a stocker with pull start, and no fuel or ignition accessories. You need to buy those separate. But it comes with the radio and motor and all that, there not like the R/C boats and ARF planes I'm used to dealing with.
Preppy, Average price is like $500 for a ready to run out of the box truck. Thats a stocker with pull start, and no fuel or ignition accessories. You need to buy those separate. But it comes with the radio and motor and all that, there not like the R/C boats and ARF planes I'm used to dealing with.
#9
haha. don't stare at it to hard there. Frank.
Originally Posted by Franken-Truck
Huh?. . .wha was that chris?. . .not really paying attention. . . staring at your avatar
Preppy, Average price is like $500 for a ready to run out of the box truck. Thats a stocker with pull start, and no fuel or ignition accessories. You need to buy those separate. But it comes with the radio and motor and all that, there not like the R/C boats and ARF planes I'm used to dealing with.
Preppy, Average price is like $500 for a ready to run out of the box truck. Thats a stocker with pull start, and no fuel or ignition accessories. You need to buy those separate. But it comes with the radio and motor and all that, there not like the R/C boats and ARF planes I'm used to dealing with.
#11
RC's are pretty popular...
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
I've got a few myself.
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
https://www.ford-trucks.com/forums/s...ght=rc+traxxas
I've got a few myself.
#12
I also started witha stamped, but it was in 2002. It lasted 6 months. I sold it due to poor chassis designe. primarly around the the motor mount where the back chassis attaches (2 piece chassis held together by plastic)
Then in a april i bought HPI savage. Roller. Built it up for bashing (huge air) Then i decided to make it a racer.
At the time i was running a XTM 24.7. But i ditched it. What a pos, dont buy it.
I just bought the mach .28 (the same one that is on the lst, except .2 bigger)
So heres my current upgrades:
Mach .28
30 wt on all shocks
shock limiter mod (made the stance lower by 2 inches)
40 series mambo wheels(gay chrome)
panther tires (not sure which ones)
Robinson racing Spur and Clutchbell set
Robinson Racing Vented flywheel
teflon shoes 1.1mm springs
30kwt front diff (not sure what th eback is, have rebuilt it yet)
cam type servo saver
hitec 645mg high torque servo
JR xs3 pro radio (boom, good radio)
Gpm racing 4.7mm TVP(twin vertical plates,POS,switching to carbon fiber)
Little mods gallor, half tank lean mod(to correct half tank lean)
Steering mod. Some others.
One piece motor mount.
On for pics. My truck is in the shop being broken in right now so illl haft to look at it again for more mods. I threw out my shoulder so i was hurting myself trying to get it to start.
http://img387.imageshack.us/my.php?image=img00020nc.jpg
MOtor(mach.28) im not a cardinals fan, thats my friends glass ive havent given it back to him yet
http://img383.imageshack.us/my.php?image=img00020cc.jpg
http://img364.imageshack.us/my.php?image=img00035yf.jpg
Jr xs3 Pro (good radio, got it for half whats its worth)
http://img111.imageshack.us/my.php?image=img00013lz.jpg
2 inches lower than normal
http://img138.imageshack.us/my.php?image=img00010am.jpg
(setting on my f150^^)
Then in a april i bought HPI savage. Roller. Built it up for bashing (huge air) Then i decided to make it a racer.
At the time i was running a XTM 24.7. But i ditched it. What a pos, dont buy it.
I just bought the mach .28 (the same one that is on the lst, except .2 bigger)
So heres my current upgrades:
Mach .28
30 wt on all shocks
shock limiter mod (made the stance lower by 2 inches)
40 series mambo wheels(gay chrome)
panther tires (not sure which ones)
Robinson racing Spur and Clutchbell set
Robinson Racing Vented flywheel
teflon shoes 1.1mm springs
30kwt front diff (not sure what th eback is, have rebuilt it yet)
cam type servo saver
hitec 645mg high torque servo
JR xs3 pro radio (boom, good radio)
Gpm racing 4.7mm TVP(twin vertical plates,POS,switching to carbon fiber)
Little mods gallor, half tank lean mod(to correct half tank lean)
Steering mod. Some others.
One piece motor mount.
On for pics. My truck is in the shop being broken in right now so illl haft to look at it again for more mods. I threw out my shoulder so i was hurting myself trying to get it to start.
http://img387.imageshack.us/my.php?image=img00020nc.jpg
MOtor(mach.28) im not a cardinals fan, thats my friends glass ive havent given it back to him yet
http://img383.imageshack.us/my.php?image=img00020cc.jpg
http://img364.imageshack.us/my.php?image=img00035yf.jpg
Jr xs3 Pro (good radio, got it for half whats its worth)
http://img111.imageshack.us/my.php?image=img00013lz.jpg
2 inches lower than normal
http://img138.imageshack.us/my.php?image=img00010am.jpg
(setting on my f150^^)
Last edited by A_G; 12-29-2005 at 08:46 PM.
#13
i have had many rc everything, i even had a 1/4 sukhoi too, sold that on ebay. i still have a 1/4 coursair i fly plus a big stick and a four star 40, i have a nitro boat that will do almost 100 mph. plus cars and trucks. I also used to run a hobby store up here in burlington iowa. so i have had my hands into everything. Big boy toys cost big money though, i once had 2500 in my 1/3 scale spacewalker and only flew it a few times before trading it to a guy for a bunch of oher stuff. I like flying the best because of the stunts and speed you can do.
#14
Originally Posted by A_G
I threw out my shoulder so i was hurting myself trying to get it to start.
What brand of truck has a plastic frame? This one has a machined aluminum frame. . .figured with the pounding these things take it would be standard
#15