Dust inside instrument cluster
Thread Starter
|
New User
Joined: Dec 2005
Posts: 18
Likes: 0
Dust inside instrument cluster
I live on a gravel road. I hate dust. does anyone know how many screws and where they are to remove the lens over the instrument cluster? I can see two. Are there some tricky ones?
Senior User
Joined: Jan 2003
Posts: 338
Likes: 0
From: Tucson
What year?
The 99's have about 7 torx screws but you have to pull the bezzle to get to them, not bad really about a 2 hour job start to finish. The trick it ot get the lens static free prior to install so the problem dows not come back quick. There are a few ways of doing this let us know if you tackle the job.
Dave
The 99's have about 7 torx screws but you have to pull the bezzle to get to them, not bad really about a 2 hour job start to finish. The trick it ot get the lens static free prior to install so the problem dows not come back quick. There are a few ways of doing this let us know if you tackle the job.
Dave
Thread Starter
|
New User
Joined: Dec 2005
Posts: 18
Likes: 0
It's a 98. I can actually see three screws along the top of what I assume we call the bezel. Interesting point about the static. I think I'll wait 'til it's warmer so there's less chance of cracking something. I'll get back to you. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
DavidE
1999 - 2003 7.3L Power Stroke Diesel
6
Mar 5, 2012 10:15 AM
oldproudvet
1987 - 1996 F150 & Larger F-Series Trucks
1
Jun 6, 2010 09:24 AM
