Dyno sim please?
Thread Starter
|
Senior User
Joined: Sep 2004
Posts: 100
Likes: 0
Dyno sim please?
howdy i was wonderin if someone could dyno sim this build for me. its a 400 out of a 1979 f250 4 speed.
Headers-Hooker comp. headers part #5206902
Cam/lifters- Summit Racing Part#SUM-K5200
Intake-Edelbrock performer Part # EDL 2171
Roller timing chain-Crane roller timing chain Part# CRN52993-1
Heads-Edelbrock Performer 351 c heads Part#61629
im planing on running a 650 cfm carb but play around with the carb to get more if u want just not planning on more than 700
thanks
Headers-Hooker comp. headers part #5206902
Cam/lifters- Summit Racing Part#SUM-K5200
Intake-Edelbrock performer Part # EDL 2171
Roller timing chain-Crane roller timing chain Part# CRN52993-1
Heads-Edelbrock Performer 351 c heads Part#61629
im planing on running a 650 cfm carb but play around with the carb to get more if u want just not planning on more than 700
thanks
Senior User
Joined: Oct 2005
Posts: 449
Likes: 0
Danlee would probably be the guy to ask, but for the same money you could get CHI heads. If you are going to spring for the money for Edelbrock heads, the CHI heads breathe better. Otherwise, I think you are on the right track.
Posting Guru
Joined: Mar 2005
Posts: 2,068
Likes: 0
From: western montana
gonna need cam specs as well. Let me know if you want to go with a hydraulic roller cam and lifters- expensive but I have a great special grind number or two that comp cams made up. free ponies after the initial investment. Kind of like hunting for all that 'free meat'.
