level the 05 2wd edge?
Thread Starter
|
Senior User
Joined: Oct 2005
Posts: 134
Likes: 0
level the 05 2wd edge?
I want to level my truck,but I do not want to mess with the torsion bars,what If I took the 2 inch steel wedge or block(whatever it is)out from the leaf springs?would that mess up anything like the driveshaft or anything?any advice would help out...
Post Fiend
Joined: Jul 2005
Posts: 8,462
Likes: 4
From: Durant, OK (SOSU)
Look into the I believe it's 3 inch drop you get from flipping your rear suspension over. It's not too challenging, and there are several places on the web that offer kits for it.
I also believe I saw a Ranger leveling kit at Stylin Concepts maybe.
I also believe I saw a Ranger leveling kit at Stylin Concepts maybe.
Elder User
Joined: Nov 2004
Posts: 759
Likes: 0
From: Ventura ,ca. (near L.A.)
When ford lifts the rear of the edge they insert a 2 inch block and a add a leaf. I would remove the add a leaf and it will drop the back end about 2 inches. Look at the leafe spring on a 2wd xlt and compare it to your edge and you'll see what you need to remove. You truck will also ride better if you remove the add a leaf.
