swapping out gears
Thread Starter
|
Elder User
Joined: Mar 2004
Posts: 976
Likes: 2
From: clinton iowa
swapping out gears
does anyone know of someone around my area who does this ,on the side maybe. looking at swapping out and setting up my gears putting some lower ones to match the tires im getting.going from 4.10's to 4.56s .looking for someone around clinton, dewitt area possibly thanks.
Hotshot
Joined: Dec 2003
Posts: 18,423
Likes: 9
From: iowa
Ah you can handle it just tear into them and getrdone. BTW you might want to check but going from 4.10 to 4.56 on a D60 might mean changing the carrier too.
BTW if anyone is interested I have a set of yukon 4.88 rev cut gears for a HP D44 that I am going to be putting on ebay pretty soon but I will sell them to anyone on here for $75 + shipping before I do just let me know. and I also have a set of 5.00s for a ford 9" and can get any 9" ratio for $100 to go with whatever.
BTW if anyone is interested I have a set of yukon 4.88 rev cut gears for a HP D44 that I am going to be putting on ebay pretty soon but I will sell them to anyone on here for $75 + shipping before I do just let me know. and I also have a set of 5.00s for a ford 9" and can get any 9" ratio for $100 to go with whatever.
Thread
Thread Starter
Forum
Replies
Last Post
swirk
Clutch, Transmission, Differential, Axle & Transfer Case
3
Sep 26, 2002 05:31 PM
