Ford FE
Posting Guru
Joined: Nov 2002
Posts: 1,260
Likes: 0
From: Napa
Aww crap I don't know. What would it look like with no egr? This intake came off a 66 F100 that was one of my parts trucks a couple of years ago. Never tried to fire up the motor but don't think there is anything wrong with it.
Thread Starter
|
Fleet Owner
Joined: Jan 2004
Posts: 26,007
Likes: 575
From: Brentwood,CA
Originally Posted by ZombieSlayer
Ok at this point I don't think it had egr. I will double check (I'll take a photo or two as well) tomorrow evening.
take your time. no hurry. i am not going anywhere with my back injury to fast
dislocated 2 ribs and refractured my sternum (SP)
Lead Driver
Joined: Sep 2003
Posts: 5,241
Likes: 3
From: Other side of the sunrise
Gashog, sorry to hear about your back injury. I Know all too well what that is all about.
The intake man that I have is off of a 1960 352. It is 2bbl and doesn't have the oval you described, indicating it is not egr. I don't think egr's were even around in 1960 were they? I also do have the heads to match. They will probably need rebuilding though, as the engine they came off of had a good amount of miles on it. Don't know if the heads were ever rebuilt during the life of the engine but can only assume.
Send me an e-mail if you want the stuff. I would be happy to see it go to a good home (instead of the dump).
Tim
The intake man that I have is off of a 1960 352. It is 2bbl and doesn't have the oval you described, indicating it is not egr. I don't think egr's were even around in 1960 were they? I also do have the heads to match. They will probably need rebuilding though, as the engine they came off of had a good amount of miles on it. Don't know if the heads were ever rebuilt during the life of the engine but can only assume.
Send me an e-mail if you want the stuff. I would be happy to see it go to a good home (instead of the dump).
Tim
Last edited by olfordsnstone; Nov 17, 2005 at 01:18 PM.
Fleet Mechanic
Joined: Nov 2004
Posts: 1,857
Likes: 5
From: Northern CA
I've been around. Hanging out in the Superduty & 67-72 forums. As for the swap, the FE engine forum has really helped me with a 390 rebuild that I just dropped into the old F100. Watched the price of gas go through the roof while I was going from big to bigger. Still working out the kinks in it. Got a carb that's too big, trying to make it work. Other than that, just trying to keep up with the Joneses.
The 2bbl I have is yours if you want it. My daughter works in Brentwood, at Baileys. I'll send her over with it if you want it.
Let me know.
gw
The 2bbl I have is yours if you want it. My daughter works in Brentwood, at Baileys. I'll send her over with it if you want it.
Let me know.
gw
Thread Starter
|
Fleet Owner
Joined: Jan 2004
Posts: 26,007
Likes: 575
From: Brentwood,CA
sure if it is not to big of a pain. i don't want you to have to go out of your way or anything.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Fleet Mechanic
Joined: Nov 2004
Posts: 1,857
Likes: 5
From: Northern CA
No problem, I can get it to you tomorrow or Sunday. I don't exactly remember where you live, & since it sounds like you're not getting around too well I'll make it easy for you. You never know, with your knowledge of Fords & stuff, I might need a favor of my own sometime. Just shoot me a address and/or phome # and we'll get it done.
gw
gw
i will send you a PM with my address.