2000 Expedition light problem
Thread Starter
|
New User
Joined: Nov 2005
Posts: 9
Likes: 0
2000 Expedition light problem
Hello. This is my first post, looks like a great source of information here.
I have a 00 Expedition 4.6 4wd and recently had the a wire harness replaced (the one located on passenger side near firewall, leads to starter) After this was replaced, I have no interior dome light when opening the door only. I also have no running board lights. The dome light does work manually when pushing the overhead button, but no longer (along with running lights) works when I use keyless entry to unlock the vehicle. All interior lights work manually.
I've checked all the fuses in both fuse boxes and all are good. Any ideas on this problem?
Thanks,
Joe
I have a 00 Expedition 4.6 4wd and recently had the a wire harness replaced (the one located on passenger side near firewall, leads to starter) After this was replaced, I have no interior dome light when opening the door only. I also have no running board lights. The dome light does work manually when pushing the overhead button, but no longer (along with running lights) works when I use keyless entry to unlock the vehicle. All interior lights work manually.
I've checked all the fuses in both fuse boxes and all are good. Any ideas on this problem?
Thanks,
Joe
Thread
Thread Starter
Forum
Replies
Last Post
rpmracing18
Electrical Systems/Wiring
4
Oct 15, 2013 05:14 PM
sdsurf
Explorer, Sport Trac, Mountaineer & Aviator
7
Mar 19, 2002 03:46 PM
