Sticker not found...
Thread Starter
|
New User
Joined: Oct 2005
Posts: 6
Likes: 0
Sticker not found...
Hi guys,
How can I refound all information from a lost sticker of my van please?
I just bought it in England two weeks ago, can't register it in my country because of this lack.
Any help will be appreciated, pictures are in my gallery to give an idea of what I'm talking about.
If by miracle someone have the same kind of van with conversion, a picture of his sticker would be greatful.
Regards,
Christian
How can I refound all information from a lost sticker of my van please?
I just bought it in England two weeks ago, can't register it in my country because of this lack.
Any help will be appreciated, pictures are in my gallery to give an idea of what I'm talking about.
If by miracle someone have the same kind of van with conversion, a picture of his sticker would be greatful.
Regards,
Christian
Last edited by diskjoncter; Oct 18, 2005 at 02:47 PM.
Senior User
Joined: Apr 2005
Posts: 455
Likes: 0
Hmmm. I'm not sure which sticker you need. The VIN (Vehicle Identification Number) is usually all we need here in the US, and it's found by looking through the windshield on the driver's side. If you mean the door placard, that's a different story. It may be nearly impossible to replace it. That sticker shouldn't be too important though. You should be able to determine the specifications from the VIN.
Thread Starter
|
New User
Joined: Oct 2005
Posts: 6
Likes: 0
Thanks,
Yes, this is the placard sticker, very important here, mass repartition (Front/Rear axles)
and other technical info.
Need this info cos the E250 wasn't imported in Belgium so even Ford belgium cannot help me.
And to have the right to drive it, I need to have all technical info for conformity spec.
That's why a picture from an other one like mine will be very useful.
Regards
Yes, this is the placard sticker, very important here, mass repartition (Front/Rear axles)
and other technical info.
Need this info cos the E250 wasn't imported in Belgium so even Ford belgium cannot help me.
And to have the right to drive it, I need to have all technical info for conformity spec.
That's why a picture from an other one like mine will be very useful.
Regards
Thread Starter
|
New User
Joined: Oct 2005
Posts: 6
Likes: 0
Yes, all info about weight is very important.
If there is a number on the front/rear axle to evaluate the exact model it should be great also but don't know where to see... and don't have a chart to compare.
If there's no security thread to send me a picture of this label I'll appreciate to see what it looks like.
Regards.
If there is a number on the front/rear axle to evaluate the exact model it should be great also but don't know where to see... and don't have a chart to compare.
If there's no security thread to send me a picture of this label I'll appreciate to see what it looks like.
Regards.
