When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a transcommand installed on my E4oD transmission. The bypass plug that comes with the kit only has one wire loop on it. This is the plug that is installed if you wish to drive the vehicle with the transcommand "off".
Well, I disassembled my bypass plug to clean it without marking down the position of the wire loop.
Could someone take a couple of good pictures of both ends of the bypass plug and email them to me?
It is not in the manual and Banks lovely customer service doesn't help. They just keep emailing me the manual.
I have a transcommand installed on my E4oD transmission. The bypass plug that comes with the kit only has one wire loop on it. This is the plug that is installed if you wish to drive the vehicle with the transcommand "off".
Well, I disassembled my bypass plug to clean it without marking down the position of the wire loop.
Could someone take a couple of good pictures of both ends of the bypass plug and email them to me?
It is not in the manual and Banks lovely customer service doesn't help. They just keep emailing me the manual.
...Welcome to Ford Truck Enthusiasts!
We are happy you have chosen the best source for Fords!
…Enjoy FTE and The State Chapters are located at the bottom of the main forum page. JOIN CLUB FTE -SUPPORT THE FORUMS!
…..See you on the boards.
Sorry to hear of your pain.
Did you dissassemble both male and female plugs?
If not then you could refrence the pinouts on the other plug. It's only one wire and two pins so it's going to be pretty hard to screw up.