Ranger Conversion
Thread Starter
|
New User
Joined: Nov 2003
Posts: 2
Likes: 0
Ranger Conversion
Trying to put a 302 in 1999 Ranger. Anyone have answers to motor mounts. Current setup seems to be offset with a steel box box on the drivers side crossmember that the mounts attach to. Any information is appreciated.
Senior User
Joined: Jun 2002
Posts: 242
Likes: 0
From: Dodgeville WI
In my 87 I used Motor mounts from www.jamesduff.com they seem to be working pretty decent, but your a setup will be different than mine.
any way good luck with your swap.
it is a pain in the rear but they once you hear the V8 Roar and have that power avaible under your foot then it all seems worth it.
any way good luck with your swap.
it is a pain in the rear but they once you hear the V8 Roar and have that power avaible under your foot then it all seems worth it.
Thread Starter
|
New User
Joined: Nov 2003
Posts: 2
Likes: 0
Thanks
Thanks. Apparently the design changed around 1999 so the adapter kits don't fit. Trying to use 1999 Explorer mounts and support brackets. Will still have to build a box for the right side crossmember, I think. Wish me luck!
