seats????
Thread Starter
|
Junior User
Joined: Sep 2004
Posts: 61
Likes: 0
seats????
g'day all
im looking at removing the huge bench seat from my chop top 71.. wondering if any one had a good idea for a replacement bucket seat choice thats easy to fit, im not a big fan of racing seats due to my over sized guts!!! but i do like to be comfy!
im looking at removing the huge bench seat from my chop top 71.. wondering if any one had a good idea for a replacement bucket seat choice thats easy to fit, im not a big fan of racing seats due to my over sized guts!!! but i do like to be comfy!
Hotshot
Joined: Oct 2002
Posts: 18,488
Likes: 22
From: The Big, Oregon
A seat from up to 91 fits on the stock 71 rails, or you can make a custom mount and run whatever seat you want. I am putting bucket seats from an 88 Subaru in mine, very comfortable, and the adjustable lumbar support is nice too.
Thread Starter
|
Junior User
Joined: Sep 2004
Posts: 61
Likes: 0
i dont think we have that type of car in australia, but im interested in the whole speaker in the head rest idea... execpt for the loudness in the ears! fuel tank is not a problem cause its now under the tray... any more ideas fellas????
Posting Guru
Joined: Dec 2003
Posts: 1,391
Likes: 0
From: South Central Boise
Trending Topics
Moderator
Joined: Dec 2003
Posts: 97,596
Likes: 2,008
From: Saskatoon, Saskatchewan
Originally Posted by thesprocket26
I have power&air 1998 Crown Vic seats in my 67 f100. Pics in the gallery
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Posting Guru
Joined: Dec 2003
Posts: 1,391
Likes: 0
From: South Central Boise
Well, the main selling point was they were in super condition. I pulled out all of the carpet and insulation on the floor. Then I set the seats in the truck and looked at where things fit like arm rests and leg room. After that I cut off some of the Crown Vic mounts and tack welded on some at the desired height I wanted the seats. Then once I got the mounts where I wanted them I drilled holes and welded the mounts. Bolts were next and I ran the wiring the other day. I have to build a custom console next week because there is only 8 inches between the seats. I will mount the seat switches in the console. Comfy leather power seats with lumbar supports for a grand total of $75($50 seat pair $25 switch pair)! I think this is too good to be true!
Freshman User
Joined: Jan 2005
Posts: 49
Likes: 0
From: Outside of Twin Falls
Seats
Hi guys, it's been a long time since I've been here, no computer at my house anymore, so I only get to get on once in a while. I put buckets out of a 95 ranger in my 70, with a work in progress center console. Hopefully i'll get a computer so I can post some pics, it's taken me a long time, but it's going to look great. If you do custom seats, don't drill holes in the floor of your truck, fab something that allows you to use your factory brackets. You might have to drill the rivets out of the sliding rails, and use the sliders that come with the other seats. Good luck.
Senior User
Joined: Feb 2006
Posts: 227
Likes: 0
From: Paulding County
Originally Posted by Big Block Boy
Hi guys, it's been a long time since I've been here, no computer at my house anymore, so I only get to get on once in a while. I put buckets out of a 95 ranger in my 70, with a work in progress center console. Hopefully i'll get a computer so I can post some pics, it's taken me a long time, but it's going to look great. If you do custom seats, don't drill holes in the floor of your truck, fab something that allows you to use your factory brackets. You might have to drill the rivets out of the sliding rails, and use the sliders that come with the other seats. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
mechelement
1999 - 2003 7.3L Power Stroke Diesel
12
Dec 31, 2008 01:37 PM
