76 390
Thread Starter
|
New User
Joined: Apr 2005
Posts: 6
Likes: 0
From: Michigan
76 390
Hey i have a 1976 F250 with a 390. The engine and exhaust are all stock except for the holley 700 cfm 4 barrel carb. I was wonderin if you guys had any idea what its max HP and Torque would be.
Lead Driver
Joined: Sep 2003
Posts: 5,844
Likes: 6
From: Albuquerque
These figures are for "stock" 1976 390FE's. Not sure how your holley 700 would raise/lower those figures. The '76 390 shows 5 different versions for that year. I'll list the 2bbl ones too for future reference:
All were 8.2:1 compression. First value is HP, second is torque.
390 Code H non-California 2 bbl 156@3400 292@2000
390 Code H California 2bbl 147@3200 288@2000
390 Code M non-California 4bbl 195@4000 312@2400
390 Code M noise-legislated area 4bbl 190@4000 292@2600
390 Code M California noise-legislated area 4bbl 183@3800 300@2400
Hope this helps...
All were 8.2:1 compression. First value is HP, second is torque.
390 Code H non-California 2 bbl 156@3400 292@2000
390 Code H California 2bbl 147@3200 288@2000
390 Code M non-California 4bbl 195@4000 312@2400
390 Code M noise-legislated area 4bbl 190@4000 292@2600
390 Code M California noise-legislated area 4bbl 183@3800 300@2400
Hope this helps...
