New on the FE Block
Thread Starter
|
New User
Joined: Aug 2005
Posts: 1
Likes: 0
New on the FE Block
Hello EVERYONE! I just joined and looking foward to all the new information that we can exchange. To start things off I have just a couple of ford products: 1965 Merc. Comet 404 with a 289, 1966 Mustang Coupe 6 CLY., and my BIG DOG is my 1972 F-100 Sport Custom with under the dash A/C and a LITTLE 390.
I have been having problems with my FE it is mixing oil in the cooling system. I have by-passed the transmission lines to a external cooler,and this did not help.
I have been told that it is the oil tubes in the block which supply oil to the rocker arms.
My BIG QUESTION is, how well does tubing these oil passages work? I would LIKE VERY MUCH TO SAVE MY .030 OVER 390!
I have been having problems with my FE it is mixing oil in the cooling system. I have by-passed the transmission lines to a external cooler,and this did not help.
I have been told that it is the oil tubes in the block which supply oil to the rocker arms.
My BIG QUESTION is, how well does tubing these oil passages work? I would LIKE VERY MUCH TO SAVE MY .030 OVER 390!
Post Fiend
Joined: Mar 2003
Posts: 14,413
Likes: 3
From: Sarnia, Ontario, CANADA!
Hi and welcome to FTE! Be sure to read this to help you around this site: https://www.ford-trucks.com/forums/s...d.php?t=300691 There are also State Chapters located near the bottom of the main forum page.
If you head on down to the engine forums you could probably find what you are looking for. Just look for the specific forum that pertains to your question.
See ya on the boards!
-Matt
If you head on down to the engine forums you could probably find what you are looking for. Just look for the specific forum that pertains to your question.
See ya on the boards!
-Matt
Thread
Thread Starter
Forum
Replies
Last Post
1990F150w351w
New Member Introductions
1
Nov 22, 2007 03:56 PM
