Doing the power brake conversion...
Thread Starter
|
Posting Guru
Joined: Aug 2002
Posts: 1,493
Likes: 1
From: Great NW
Doing the power brake conversion...
I am going to slap some power brakes in my '74 F-100 when I put in my new (vacuum-producing) I-6.
Is any one Brake Booster/Master Cylinder better than another (F-250, F-350, etc.)? Will the new MC interface OK with my pedal assembly?
Thanks for your help!
GS
Is any one Brake Booster/Master Cylinder better than another (F-250, F-350, etc.)? Will the new MC interface OK with my pedal assembly?
Thanks for your help!
GS
Posting Legend
Joined: Sep 2001
Posts: 30,255
Likes: 37
Doing the power brake conversion...
There is an article in the tech articles here:
[link:www.ford-trucks.com/articles/oct2001/brakeupgrade.php|Brake upgrade]
There is also info at Bronco.com on brake conversions.
While they may not directly relate to your application they contain some good information.
[link:www.ford-trucks.com/articles/oct2001/brakeupgrade.php|Brake upgrade]
There is also info at Bronco.com on brake conversions.
While they may not directly relate to your application they contain some good information.
