Chevy Dana 44
Thread Starter
|
Senior User
Joined: Apr 2002
Posts: 113
Likes: 0
From: Clarksville, TN
Chevy Dana 44
I found a Dana 44 from a 76 Chevy truck. I'm planning on using the disc brake setup from this on my 73 Bronco. I also need a 3.55 front ring and pinion. I need the carrier also since I'm changing over from a 4.11. Can I use the ring and pinion and carrier from the Chevy housing into my housing?
Larry
Larry
Postmaster
Joined: Dec 2002
Posts: 3,594
Likes: 2
From: Southern Oregon USA
The carrier will work just fine. Have you checked to see what the ratio is? Factory GM ratios for that pickup are 3.08, 3.42, 3.73, and 4.11. There are aftermarket 3.55's available for them though.
Jason
Jason
