Cab Mounts
Thread Starter
|
Freshman User
Joined: Sep 2001
Posts: 26
Likes: 0
Cab Mounts
Hi all,
I haven't been here for a while, but we're hoping to finish up my F350 this winter and I'm a little stuck.
Does anyone have the specs on cab mounts? I have a 73 and a 74 manual which have a ton of dimensions except for the cab mounts. Ours were completely rusted out so we have to fabricate them. And we don't have much to go on from the truck, the steering was holding a lot of stuff up!
Also, any suggestions on cab mount bushings? We were planning on going with Energy Suspension.
We're hoping to get the cab back on the frame soon so any help would be greatly appreciated.
Thanks!
Diane
I haven't been here for a while, but we're hoping to finish up my F350 this winter and I'm a little stuck.
Does anyone have the specs on cab mounts? I have a 73 and a 74 manual which have a ton of dimensions except for the cab mounts. Ours were completely rusted out so we have to fabricate them. And we don't have much to go on from the truck, the steering was holding a lot of stuff up!
Also, any suggestions on cab mount bushings? We were planning on going with Energy Suspension.
We're hoping to get the cab back on the frame soon so any help would be greatly appreciated.
Thanks!
Diane
Thread Starter
|
Freshman User
Joined: Sep 2001
Posts: 26
Likes: 0
Cab Mounts
>>might try gettin a set from the online store here...
>
>Thanks for the tip. Guess that's proof I haven't been here
>for awhile!
>
Yep, replying to myself. I see cab mounts, not bushings. I take it these are "repro" pieces? Thinner steel and not always exact is what we normally find (not just with the truck).
That's why we were hoping to find dimensions so we could fab our own out of thicker steel.
Thanks,
Diane
>
>Thanks for the tip. Guess that's proof I haven't been here
>for awhile!
>
Yep, replying to myself. I see cab mounts, not bushings. I take it these are "repro" pieces? Thinner steel and not always exact is what we normally find (not just with the truck).
That's why we were hoping to find dimensions so we could fab our own out of thicker steel.
Thanks,
Diane
Thread
Thread Starter
Forum
Replies
Last Post
hucka1a
1999 - 2003 7.3L Power Stroke Diesel
12
Jan 6, 2009 01:06 PM
ernesteugene
1999 - 2003 7.3L Power Stroke Diesel
36
Oct 13, 2007 05:35 AM
