Radiator Dimensions

Reply Subscribe

Thread Tools

Search this Thread

Aug 2, 2005 | 06:51 PM

rogerf100

Thread Starter

Elder User

Joined: May 2001

Posts: 736

Likes: 0

From: Owasso Oklahoma USA

Radiator Dimensions

I need the dimensions between the tanks and the width of the core to order an electric fan for my 1955 F100. Can't get to my radiator for a while. Thanks in advance.

Aug 2, 2005 | 08:56 PM

imlowr2

Postmaster

Joined: Apr 2004

Posts: 3,005

Likes: 2

From: Santa Clarita

I don't know the measurements, but if you go to the mid fifties.com website, it gives you all the dimensions of the radiators. Hope this helps. Roger, if you going to install an electric fan, I believe the 14 inch fan should work nicely.

Last edited by imlowr2; Aug 2, 2005 at 08:59 PM.

Aug 2, 2005 | 11:08 PM

rogerf100

Thread Starter

Elder User

Joined: May 2001

Posts: 736

Likes: 0

From: Owasso Oklahoma USA

Thanks, I have a printed catalog to look it up. I am looking at an 18 inch 6 blade fan from Summit for $84.88, that is the fan only. Have to add for an adjustable fan controller I want and a relay. Total cost is $115 plus shipping. The fan has brackets that will bolt to the radiator supports. The fan controller has a dial to adjust the temp the fan comes on from 160 to 240 degrees. Here is a link to the fan.

http://store.summitracing.com/defaul...SUM%2DCSUM1734

Aug 4, 2005 | 11:10 AM

imlowr2

Postmaster

Joined: Apr 2004

Posts: 3,005

Likes: 2

From: Santa Clarita

Roger, sounds good. If the current radiator isn't the exact measurements, you can still fabricate some brackets to make it work. It doesn't take much to make some brackets. Good luck.