Greetings ... and HELP!
Thread Starter
|
New User
Joined: Jul 2005
Posts: 14
Likes: 0
Greetings ... and HELP!
This seems like an awesome site.
I'm looking for advice regarding my '90 2.9l 5-speed Ranger 2WD. I've got the tranny out (clutch was slipping) and am trying to determine where all the black oil sludge came from - all inside the bell housing. Rear seal looks good. Could it be the back end of the oil pan gasket? Is there a seal in the front of the tranny behind the hydraulic slave that could be leaking gear oil into the clutch housing? I've never noticed oil on the ground under the truck...
Should I post this on another forum?
Thanks ...mjk
I'm looking for advice regarding my '90 2.9l 5-speed Ranger 2WD. I've got the tranny out (clutch was slipping) and am trying to determine where all the black oil sludge came from - all inside the bell housing. Rear seal looks good. Could it be the back end of the oil pan gasket? Is there a seal in the front of the tranny behind the hydraulic slave that could be leaking gear oil into the clutch housing? I've never noticed oil on the ground under the truck...
Should I post this on another forum?
Thanks ...mjk
New User
Joined: Jan 2008
Posts: 0
Likes: 24
Welcome to FTE !
Yes,
Here is something that may help you.
https://www.ford-trucks.com/forums/s...d.php?t=300691
Yes,
Here is something that may help you.
https://www.ford-trucks.com/forums/s...d.php?t=300691
Thread
Thread Starter
Forum
Replies
Last Post
Ray Desrosiers
New Member Introductions
1
Jan 10, 2008 12:04 AM
