front bulb replacement
Thread Starter
|
Junior User
Joined: Sep 2004
Posts: 50
Likes: 0
front bulb replacement
Today I tried to replace 1 of my front marker lights,the one in the turn signal 01 super-duty so I took out the 2 screws on the front but light still would not come out. Is there more fasteners on this light that I am not seeing? Thanks
Senior User
Joined: Dec 2004
Posts: 112
Likes: 0
From: Gilbert, Arizona
The two screws at the bottome are the only screws. Take a screwdriver or trim tool and just pry the light assembly out of the opening. There are a couple of ball and sockets that hold the light in after that and it will just pop out.
Hope that helps.
Hope that helps.
Posting Guru
Joined: Nov 2003
Posts: 1,949
Likes: 0
From: Near DC
Originally Posted by l.stull
hey thanks vfrrrick I will try that tomorrow. Dont like burnt out bulbs on my truck.
I'm going that route so I'll never be concerned about a single bulb burning out.
