Need Help, Again
Thread Starter
|
Cargo Master
Joined: Jan 2005
Posts: 2,497
Likes: 5
From: Tucson AZ
Need Help, Again
Does anyone know what the rollers are that come with the aftermarket front hinge kits? I know that the hinge/pivot assembly is from a BMW, but the roller doesn't look anything like anything in the BMW explosion books. I need to finish the fab work on these, they are the only thing holding me up from going to the body shop. The vendors won't give up any info. Thanks in advance.........
Roast em' if you got 'em
Joined: Mar 2005
Posts: 21,996
Likes: 9,884
From: Rio Rancho, NM
I'm not familiar with them at all. Have you looked in places like McMaster-Carr?
http://www.mcmaster.com/
I hate it when vendors won't help you out
Good luck
Bobby
http://www.mcmaster.com/
I hate it when vendors won't help you out
Good luck
Bobby
Logistics Pro
Joined: Oct 2002
Posts: 4,489
Likes: 5
From: Valley Center, CA
FF, the rollers are not available so says my buddy that just made his own kit. But I can tell you that he used a substitute. He took two wheels off of a roller blade that kids ride on. He removed the outside rubber donut, and viola' he had very nice rollers for his hood. {-} Jag
Hotshot
Joined: Oct 2004
Posts: 15,882
Likes: 88
From: Durham NC
rollers??? I don't need no steekin rollers! I am midway through front hinging my hood, and have designed hinges that are so simple that I don't know why they haven't been done before. Stay tuned for pictures when I've finished!
Thread Starter
|
Cargo Master
Joined: Jan 2005
Posts: 2,497
Likes: 5
From: Tucson AZ
Trending Topics
Hotshot
Joined: Oct 2004
Posts: 15,882
Likes: 88
From: Durham NC
Could you use rollers from sliding doors or roll up garage doors? They come in a lot of different sizes for different weight doors up to sliding barn doors. You may need to remove the nylon "tire" tho.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Roast em' if you got 'em
Joined: Mar 2005
Posts: 21,996
Likes: 9,884
From: Rio Rancho, NM
Fenders, Thats a bummer that McMaster didn't have them. You might search their catalog anyway and see if there are any that might work. Sometimes the people you talk to their get a little confused or might not fully understand what you are trying to do. Try a local hardware store, don't limit your search to strictly automotive stores.
Do you have a army surplus store around? Or try an online search for companies that sell parts to robotics entusiasts or science fair type stuff.
Ax, can't wait to see the pics of the finished hinge
Bobby
Do you have a army surplus store around? Or try an online search for companies that sell parts to robotics entusiasts or science fair type stuff.
Ax, can't wait to see the pics of the finished hinge
Bobby
Hotshot
Joined: Oct 2004
Posts: 15,882
Likes: 88
From: Durham NC
Once more: I picked up some flanged nylon bushings at my local Ace Hdwr store to use in my hinges. you could use two on a shaft or bolt with the flanges to the outsides to create a flanged roller.
Last edited by AXracer; Jul 18, 2005 at 02:27 PM.
Posting Guru
Joined: Mar 2003
Posts: 1,734
Likes: 2
From: Kansas City area
fatfenders56
The ones on my hood remind me of nylon rope pulleys. You might check with marine supply houses to see if you could adapt a 1/4 or 3/8" rope pulley to your needs. Just a thought.
The ones on my hood remind me of nylon rope pulleys. You might check with marine supply houses to see if you could adapt a 1/4 or 3/8" rope pulley to your needs. Just a thought.
Logistics Pro
Joined: Oct 2002
Posts: 4,489
Likes: 5
From: Valley Center, CA
I like the idea about the rope pulley also. I believe that I have seen those at hardware stores like Ace or OSH. The were on a bracket, but you could remove the pin and replace it with a shoulder bolt. 
Jag
Jag
