Which water pump?

Reply Subscribe

Thread Tools

Search this Thread

Jul 7, 2005 | 05:24 PM

jesse1385

Thread Starter

Senior User

Joined: Jan 2005

Posts: 138

Likes: 0

Which water pump?

I have a 92' 5.0L H.O that came with serpentine belt system. I also believe it came with a reverse rotaion water pump. I am converting it over to v-belt. So, I need a standard rotation water pump? When I say I need a water pump at the parts place what year engine do I tell them for standard rotation? Thanks for any help.

Jul 7, 2005 | 09:28 PM

RTM

Cargo Master

Joined: Dec 2003

Posts: 2,735

Likes: 38

From: Sunny Florida

I think the 70 and later have the lower radiator coolant hose on the correct side for your radiator. If it's not then you may need a pre 70 pump but this also must match the pulley set you have. I think the balancer is going to stick out farther on the 92 motor.

If all else fails try calling March Pulleys and see what they say.

Jul 10, 2005 | 10:58 PM

Squeak51

Freshman User

Joined: Oct 2004

Posts: 48

Likes: 0

From: Sacramento, CA

Hey Jesse, check this link out. It should provide some addtional information.

https://www.ford-trucks.com/forums/s...68#post2497268

Jul 13, 2005 | 10:40 PM

baddad457

Hotshot

Joined: May 2003

Posts: 11,141

Likes: 25

From: south louisiana

You'll not only need a std. rotation pump, but you'll also need the correct timing cover that goes with it as well. Your current timing cover will not work with a std. rotation pump.