'88 B2 removing main harness
Thread Starter
|
Senior User
Joined: Sep 2003
Posts: 223
Likes: 0
From: York, PA
'88 B2 removing main harness
Does anyone here have experience on removing the main wiring harness in the '88 Bronco II with a 2.9, I am talking from the starter solenoid on the right side, across the radiator support, back the left side then through the firewall. The part through the firewall is what I am interested in learning about. Does the instrument cluster or complete dash unit have to be removed, ect, ect., or is it a matter of a couple close connectors inside at dash level?
Thank you for your time. Broken Wire
Thank you for your time. Broken Wire
