Width

Reply Subscribe

Thread Tools

Search this Thread

Aug 22, 1999 | 08:23 PM

mandm

Thread Starter

Freshman User

Joined: Aug 1999

Posts: 26

Likes: 0

Width

Sep 1, 1999 | 05:15 PM

Ryan. M

Guest

Posts: n/a

Width

I own a 1989 F-150 4x4 with the factory "rally's". I am running Lt235/75R15 Wild Country RVT's. I want to put a 1" or 2" suspension lift and would like to have either 30's or 31's. What is the max width I can fit on the Rally's?

Sep 2, 1999 | 08:21 AM

Todd

Junior User

Joined: Jun 1999

Posts: 50

Likes: 0

Width

Ryan,

I'm currently running 31x10.5 BFG A/T's on my 93 4x2 with no problems. The rims are the factory steel 15x7. So go ahead and put on the 31's. They should fit with no problems on a 4x4.

Sep 2, 1999 | 02:16 PM

Ryan M.

Guest

Posts: n/a

Width

>Ryan,
>I'm currently running 31x10.5 BFG A/T's on
>my 93 4x2 with no problems.
> The rims are the factory
>steel 15x7. So go ahead
>and put on the 31's.
>They should fit with no problems
>on a 4x4.

So could I put 10.50's or do they have to be 8's?

Sep 2, 1999 | 02:18 PM

Ryan M.

Guest

Posts: n/a

Width

Sep 3, 1999 | 03:26 PM

Todd

Guest

Posts: n/a

Width

There is a little rubbing on the radius arms when at full lock. Don't forget that I have a 4x2, you may not run into this problem with a 4x4. The speedo is off some, but I'm not sure how much. It's never really bothered me as I usually go with the flow in traffic.

Todd

Reply Subscribe