currently mine has no exhaust from the headers back and it sound like a catilpillar front end loader
lets play best sound
Posting Guru
Joined: Jul 2003
Posts: 2,454
Likes: 1
From: Adams TN
But how do i put them on this site?
And No the depth comes from the exhuast tubing. But a 5" on a 300 is WAY to big. So you can get a 5" tip and get the same sound as a 5" exhaust if the tip is long enough
DT
And No the depth comes from the exhuast tubing. But a 5" on a 300 is WAY to big. So you can get a 5" tip and get the same sound as a 5" exhaust if the tip is long enough
DT
Mountain Pass
Joined: Feb 2004
Posts: 197
Likes: 0
From: In the swamps of Florida
DT 466-
Do you still have the stock intake and exhaust manifolds on your truck? I'm trying to decide what kind of exhaust to run on mine. I would like it to sound like you described yours. I will be using EFI manifolds, though.
Do you still have the stock intake and exhaust manifolds on your truck? I'm trying to decide what kind of exhaust to run on mine. I would like it to sound like you described yours. I will be using EFI manifolds, though.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Posting Guru
Joined: Jul 2003
Posts: 2,454
Likes: 1
From: Adams TN
Yup stock log manifold and 1bbl intake.
I'm planning on upgrading to EFI manifolds and a 4bbl intake after i paint the truck.
I drove it about 100 miles today 1st time it has been on the road since school let out last month.
It sound's like what i said above but around 2k rpm it sounds like a Straitpiped Semi. It's awsome.
ST
I'm planning on upgrading to EFI manifolds and a 4bbl intake after i paint the truck.
I drove it about 100 miles today 1st time it has been on the road since school let out last month.
It sound's like what i said above but around 2k rpm it sounds like a Straitpiped Semi. It's awsome.
ST
New User
Joined: Jun 2005
Posts: 12
Likes: 0
My friend with the 84 ford is thinking of chainging his setup again, this time a 5" stack in the bed. That damn thing is amazing I drove it today, had it in granny gear and tromped on it and that damn thing went sideways. What a fun old truck.
Posting Guru
Joined: May 2004
Posts: 2,161
Likes: 1
From: Prince George, B.C.
This is actually kind of sad on my part but i somhow got the 300 sound out of my 400 Dodge. I can't quite figure this but it has a single 3" now, I just welded a short spiral ting into it to spin the exhaust and now it sounds like a 300. Everyne asks if I have a slant in it now. Now for the polished stainless 6x24" tip that the one shop made up.
Thread
Thread Starter
Forum
Replies
Last Post
Katmandu
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
7
Nov 29, 2005 01:05 AM
fordmudrunner2020
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
7
Jul 11, 2003 05:59 AM