Intake Manifold
Thread Starter
|
Freshman User
Joined: Mar 2005
Posts: 35
Likes: 0
Boy do I feel dumb. The intake doesnt have anything to do with the dist. I just didnt want to take the pan off with the pump again. But when I took the pan off I jacked the front end of the truck up and the pan fell out then I was able to drop the oil pump and reinsert the rod. Works great and the pan is cake without worring about the pump. Thanks for all the help. Troy
Senior User
Joined: Sep 2004
Posts: 263
Likes: 0
From: FLOWER MOUND,TX
leroy
[QUOTE=TxBrokenarrow]the shaft may be i the right place..you may have broken a roll pin on the distributor.look at the distributor.take the cap off.then rotate the bottom gear and see if the rotor is turning[/QUOTE
you should still check out the distributor as mentioned for broken roll pin.good luck
you should still check out the distributor as mentioned for broken roll pin.good luck
