Overhead console hookup
Thread Starter
|
Gone but not forgotten.
Joined: Jul 2001
Posts: 6,521
Likes: 2
Overhead console hookup
I'm about to start the install of an Explorer overhead console in my '04 Edge. Thanks to some links I got from this forum the job will be less difficult. My only remaining problem is how to tap into the speed sensor. Some of the links I went to left this wire unhooked and the one that did connect it is a different model than mine with connectors located in different places. Any one know where I can tap into the VSS on an '04 Edge?
Dono
Dono
Thread Starter
|
Gone but not forgotten.
Joined: Jul 2001
Posts: 6,521
Likes: 2
Originally Posted by Ken00
My manual shows it as a gy/bk wire, it comes from the PCM pin 68.
Dono
Thread
Thread Starter
Forum
Replies
Last Post
