Wires
#2
On an engine with the
1 5 4 6 3 2 7 8 firing orders the #7 wire & the #8 wire should be separated by the plastic spacers mid-harness & on the valve cover.
On the valve cover seperator they should be from front to back #5 #7 # 6 #8
Reason:
Once wires go bad they can arc over & create a cross-firing engine.
http://www.nightrider.com/biketech/truth.htm
1 5 4 6 3 2 7 8 firing orders the #7 wire & the #8 wire should be separated by the plastic spacers mid-harness & on the valve cover.
On the valve cover seperator they should be from front to back #5 #7 # 6 #8
Reason:
Once wires go bad they can arc over & create a cross-firing engine.
http://www.nightrider.com/biketech/truth.htm
Last edited by Mil1ion; 05-06-2005 at 09:12 PM.