Mako suspension
Thread Starter
|
Junior User
Joined: Mar 2005
Posts: 63
Likes: 0
Mako suspension
Has anyone out there used this this brand on a 1995 stock bronco xlt? I'm starting to need new springs anyways all the way around. I know this kit has a add a leaf, but mine is sagging on the rear drivers side and addiing just one leaf on both of the old ones wont level it out. I will be purchasing new leaf springs then adding these. Any suggestions is welcome. Only wanting to get 2" up with out the use of coil spring spacers.
FTE Leadership Emeritus
Joined: Jan 2003
Posts: 161,999
Likes: 75
From: 3rd Rock
...Welcome to Ford Truck Enthusiasts! Please read the Guidelines, it will help you to navigate through and understand this site.
Stick around someone will be by shortly to answer your question.
We are happy you have chosen the best source for Fords!
Enjoy FTE....and
JOIN CLUB FTE -SUPPORT THE FORUMS!
…..See you on the boards.
Stick around someone will be by shortly to answer your question.
We are happy you have chosen the best source for Fords!
Enjoy FTE....and
JOIN CLUB FTE -SUPPORT THE FORUMS!
…..See you on the boards.
Junior User
Joined: Jun 2004
Posts: 52
Likes: 0
your front end alighnment will be really bad with a 2" lift. you definately have to get the camber adjusters, and even then its hard to do. if you put those on, do your ball joints at the same time. Just go for a 4" lift.
Thread Starter
|
Junior User
Joined: Mar 2005
Posts: 63
Likes: 0
I know about the camber bushings, but with a 4" you still have to use them anyways, plus a few other mods. I need to do the front end anyways if using new ball joints would it still be a pain for the alignment. Thanks for the response.
Thread
Thread Starter
Forum
Replies
Last Post
