I'm Back!!!!!!!!!!
Thread Starter
|
Posting Guru
Joined: Mar 2003
Posts: 1,311
Likes: 0
From: Quispamsis, N.B, Canada
I'm Back!!!!!!!!!!
Hey guys. Just wanted to let everyone know that I havn't sold my blue ford and I'm back on the site to cater to your every needs...lol.
I see alots been going on here and I like it already. I just wanted that Trans Am so bad and almost bought one but I figured it was gonna end up costin' me 10 grand so I backed out. Plus trucks are so much more fun.
So now that I'm back I might as well ask ya'll a question. I have rust. I have rust just like most of the older vehicles in my area. Its all over the fenders and there's a beautiful hole in the front. Also my damn tires rub! Ahh I know I know put a lift in her eh? Well how about this? Cut the fenders a little bit and install some bushwacker fender flares? That way I can cut the rust away and add some looks. If anyone has some pics or input please post! Thanks guys... Man this site is way nicer than before!
Moose94
I see alots been going on here and I like it already. I just wanted that Trans Am so bad and almost bought one but I figured it was gonna end up costin' me 10 grand so I backed out. Plus trucks are so much more fun.
So now that I'm back I might as well ask ya'll a question. I have rust. I have rust just like most of the older vehicles in my area. Its all over the fenders and there's a beautiful hole in the front. Also my damn tires rub! Ahh I know I know put a lift in her eh? Well how about this? Cut the fenders a little bit and install some bushwacker fender flares? That way I can cut the rust away and add some looks. If anyone has some pics or input please post! Thanks guys... Man this site is way nicer than before!
Moose94
Post Fiend
Joined: Nov 2001
Posts: 14,947
Likes: 6
From: Topsfield, MA
I think that you'll find most people here havn't cut their fenders. I havn't seen many, I think this generation is only 1/2 at that stage. Most of us still have these trucks in steady daily driver use, and havn't gotten into things like cutting fenders.
Mask off some areas with black tape and put the fender flares over it, and it'll help you visualize what you want to do. I don't see any reason not to cut them, just line everything up the way you like it and go to town.
Glad to have ya back! I was gettin' worried.
Mask off some areas with black tape and put the fender flares over it, and it'll help you visualize what you want to do. I don't see any reason not to cut them, just line everything up the way you like it and go to town.
Glad to have ya back! I was gettin' worried.
Thread Starter
|
Posting Guru
Joined: Mar 2003
Posts: 1,311
Likes: 0
From: Quispamsis, N.B, Canada
Thanks so much mustang! I just wanted to cut them because my 33's rub and I bet it would look cool too. I still don't have any pictures of any trucks with cut fenders yet. So you say do a mock up first? At least then I'd know what I'm in for. Does anyone have any pictures? Thanks.
Elder User
Joined: Mar 2000
Posts: 725
Likes: 0
Trending Topics
Senior User
Joined: Nov 2003
Posts: 308
Likes: 0
From: Alberta
Rust? must be from NB
hey moose, i used to live in quispamsis. i graduated from kvhs in 98, after that i moved to alberta where the money is. Alot has changed there from what i have heard.
But yea, NB = salty roads = rust!lol
But yea, NB = salty roads = rust!lol
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Thread Starter
|
Posting Guru
Joined: Mar 2003
Posts: 1,311
Likes: 0
From: Quispamsis, N.B, Canada
That's for sure fella! 98 eh? I would have still been in High School. I graduated in 2003 I think...lol.
Ya the roads are salty here but when I get this done I am going to oil every single inner fender and hopefully it'll work good. I havn't seen chopped fenders that have fender flares installed but my friend and I are going to take our time, mask it off and just really make it look good. Plus if all else fails fenders are cheap.
Some things have changed, its becoming a more expanding area. There are more houses going up witch means less places to go offroad, but overall its an alright place to live.
Ya the roads are salty here but when I get this done I am going to oil every single inner fender and hopefully it'll work good. I havn't seen chopped fenders that have fender flares installed but my friend and I are going to take our time, mask it off and just really make it look good. Plus if all else fails fenders are cheap.
Some things have changed, its becoming a more expanding area. There are more houses going up witch means less places to go offroad, but overall its an alright place to live.
Senior User
Joined: May 2004
Posts: 333
Likes: 0
I think it would look great with fender flares. Have you had it undercoated? I suggest (if you havent already) take it somewhere to have it steamcleaned and undercoated professionally, you can have them drill holes in panels and spray inside them as well. So glad i bought mine in salt free florida, shes only seen a couple months of salty roads but i had it undercoated and wash/waxed soooo much i dont think the salt made any difference. Good that your back and keeping your truck, it looks sweet.
Last edited by Sn0wMan; May 7, 2005 at 12:47 PM.
Posting Guru
Joined: Nov 2004
Posts: 1,467
Likes: 0
From: N. Gwinnett Co. Georgia
Welcome back, glad you've come home. I took a picture of a camoflauge F250 with non-floating rear axle and cutout front fenders that a dozer/loader driver has at a development. He waited a little too long after cutting and now has to address some rust issues. You can see where he was going with it though and it looked good. He is running 33" tires as well. I'll ge them posted pretty quickly in my gallery.
Post Fiend
Joined: Nov 2001
Posts: 14,947
Likes: 6
From: Topsfield, MA
My truck has seen 3-4 months of salt/snow a year it's whole life, I've got 2-3 tiny rust spots on the body, a little rot under the edge of the supercab on the drivers side, and a little surface rust on the rear wheel wells. I'm having it all properly fixed in a couple months. Gotta get that stuff early before it gets too bad. My uncle owns a body shop 
My 89 has rust on the bottom lower corners of the cab/doors, and a few spots here and there, nothing serious. I'm going to experiment with bodywork on my 89 over the summer.
I was in maine a few months ago and saw an early 90s something dakota with some pretty rotted wheel wells. It was rotted up the side of the vehicle, the outer sheetmetal of the bed was rotted away almost up to the bed rails. I think it was about time for a new bed ha.
My 89 has rust on the bottom lower corners of the cab/doors, and a few spots here and there, nothing serious. I'm going to experiment with bodywork on my 89 over the summer.
I was in maine a few months ago and saw an early 90s something dakota with some pretty rotted wheel wells. It was rotted up the side of the vehicle, the outer sheetmetal of the bed was rotted away almost up to the bed rails. I think it was about time for a new bed ha.
Thread Starter
|
Posting Guru
Joined: Mar 2003
Posts: 1,311
Likes: 0
From: Quispamsis, N.B, Canada
Originally Posted by tex94F250
Welcome back, glad you've come home. I took a picture of a camoflauge F250 with non-floating rear axle and cutout front fenders that a dozer/loader driver has at a development. He waited a little too long after cutting and now has to address some rust issues. You can see where he was going with it though and it looked good. He is running 33" tires as well. I'll ge them posted pretty quickly in my gallery.
That's just alittle weird. My truck sits nose down right now and do you guys think that just cutting the front is a better idea? Nothing rubs in the back.