Am I missing something?
Thread Starter
|
Junior User
Joined: Feb 2005
Posts: 98
Likes: 0
Am I missing something?
I went out to try and set the timing on my truck today, and I could not find the timeing marks on the crank. (67' 352) Then I got to looking at it, and I don't see a harmonic balancer on my crank. Isn't there supposed to be one for these engines?
Here are some pics:
https://www.ford-trucks.com/user_gal...oid=75156&.jpg
https://www.ford-trucks.com/user_gal...oid=75157&.jpg
https://www.ford-trucks.com/user_gal...oid=75158&.jpg
Here are some pics:
https://www.ford-trucks.com/user_gal...oid=75156&.jpg
https://www.ford-trucks.com/user_gal...oid=75157&.jpg
https://www.ford-trucks.com/user_gal...oid=75158&.jpg
Last edited by Torque1st; Apr 23, 2005 at 06:41 AM. Reason: remove img tags
Postmaster
Joined: Apr 2002
Posts: 3,613
Likes: 6
From: Coal country
It looks like you have the balancer with the sheave cut into it directly.
This was common.
John is right; a little sandpaper and a dab of white paint or "whiteout" wiped over the nothces will reveal them.
This was common.
John is right; a little sandpaper and a dab of white paint or "whiteout" wiped over the nothces will reveal them.
Thread
Thread Starter
Forum
Replies
Last Post
gobybike
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
May 6, 2011 09:56 PM
caddys83
General NON-Automotive Conversation
10
Feb 5, 2006 10:33 PM
RRMike
Offroad & 4x4
9
Mar 8, 2004 02:52 PM
