need stock intake manifold
Thread Starter
|
New User
Joined: Oct 2004
Posts: 11
Likes: 0
need stock intake manifold
I was wondering if somebody may have their old stock intake manifold from when they upgraded to a clifford or something because I found a crack on one of the corners on mine. its sucking air through and making the engine miss.
if you habe one or know where I can get one let me know something.
thanks for any help
(I have already checked all of the local junkyards where I am)
if you habe one or know where I can get one let me know something.
thanks for any help
(I have already checked all of the local junkyards where I am)
Posting Guru
Joined: Feb 2005
Posts: 2,499
Likes: 1
From: Missoula, MT.
i would give you mine, but its still on my truck, havn't got the new one yet, for now try to seal it up with some jbweld or something, i have used jb before and its good stuff, just make sure its good and hard before you fire her up, should wait at least over night. might be who of you to take off the intake if you are going to jb weld it, and make sure to not get any inside.
