94 gauge conversion
Thread Starter
|
Senior User
Joined: May 2004
Posts: 111
Likes: 0
From: Jacksonville Florida
94 gauge conversion
i have a 94 ranger which unfortunately doesnt have a tach. i talked to thisd one guy on this site he said that it might be possible to swap out my stock gauge panel with a panel the same year as mine but with a tach?wouldnt i have to reset the mileage? any commect would be greatly appericated
Post Fiend
Joined: Dec 2001
Posts: 10,562
Likes: 4
From: South Jersey
I would expect any cluster from 93-97, I'm pretty sure the interior didn't change, would work fine, just get one from a truck with the same number of cylinders.
You might be able to swap the odometers or you could document the change.
You might be able to swap the odometers or you could document the change.
Posting Guru
Joined: Jul 2003
Posts: 1,978
Likes: 1
From: Alvin, Texas.
I swapped a tach cluster from an Exploder with auto into my 2.3L 5-speed truck. Works just fine.
You can swap odometers, too. If I had known this was around, I would have added to your other post, b&s94....
You can swap odometers, too. If I had known this was around, I would have added to your other post, b&s94....
