fwd hub help
#1
fwd hub help
I replaced front rotors and pads on a 96psd with the heavy duty suspension. now the spindle is not square to the hub so the 4wd won't engage. the space between the spline and hub on the top is smaller than on the bottom. I checked to make sure the hub is seated on the disc all around. because the space above the splined spindle is too small, the hub won't go in and engage. Any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post
7622RM
1983 - 2012 Ranger & B-Series
18
03-22-2019 10:25 PM
kissfan79
Excursion - King of SUVs
16
11-18-2013 09:41 AM
78Explorer
1978 - 1996 Big Bronco
7
08-05-2011 02:53 PM