AVIC N2 for 2004 expedition install question
Thread Starter
|
New User
Joined: Apr 2005
Posts: 2
Likes: 0
AVIC N2 for 2004 expedition install question
I just bought a Pioneer AVIC-N2 for my 2004 expedition. I'm having a hard time installing the car speed signal input. It says to connect to the speed detection circuit lead but I don't know where that is and I have been looking all day. Does anyone know where it is so I can finish the install.
Also it says I need to connect to the power supply on the parking brake switch in order to view video. Please let me know if there is a way around this.
Also it says I need to connect to the power supply on the parking brake switch in order to view video. Please let me know if there is a way around this.
Senior User
Joined: Nov 2003
Posts: 435
Likes: 0
From: MASS
speed sensor wire is GRAY/BLACK
you should find it right in the factory wire harness for stock radio
should be an unused wire if you have an adapter plugged to it for your aftermarket head unit
if not it is in the dash
the parking brake lead needs a negative trigger wire
beware not only of the legal issue--but I believe on the N2's
they will sense the vehicle in motion thru the gps and automatically
shut down dvd playback
g/l
Josh
JB Customs
you should find it right in the factory wire harness for stock radio
should be an unused wire if you have an adapter plugged to it for your aftermarket head unit
if not it is in the dash
the parking brake lead needs a negative trigger wire
beware not only of the legal issue--but I believe on the N2's
they will sense the vehicle in motion thru the gps and automatically
shut down dvd playback
g/l
Josh
JB Customs
Thread
Thread Starter
Forum
Replies
Last Post
dirtriderdan
1997 - 2006 Expedition & Navigator
2
Mar 16, 2008 12:22 AM
Go Aweigh2452
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
19
Sep 23, 2005 12:39 AM
pcguy760
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
1
Sep 14, 2005 04:31 PM
