Need advice on engine replacement
Thread Starter
|
Tuned
Joined: Feb 2003
Posts: 426
Likes: 4
Need advice on engine replacement
I'm looking for a replacement engine for my fuel injected 300. If I find an older model carbureted engine, will my fuel injected head bolt up to it? If anyone has done this and can tell me the problems I might run into, please let me know.
Thanks,
Thanks,
Senior User
Joined: Dec 2004
Posts: 233
Likes: 0
From: centeral Ohio
I beleive a efi head works on a carb'd engine just not the other way around. Also i beleive it will pump your compression a little to about 9.2 or so i think i remember hearing. Kinda like the old a square is a rectangle but, a rectangle isn't always a square thing. Do no quote me on these though as i have never done it it is only here say. Do a search on it something like efi head on a carb'd motor or such. Im sure you will find something good luck!
New User
Joined: Apr 2005
Posts: 8
Likes: 0
i don't know if you might be interested or not i have an old inline 6cyl out of a 1976 f150 that has only 55,000 original miles on it i took it out to install a built 390. i'm looking to sell it have no use for it now looking to get like $200.00 for it. have everthing from bellhousing to motor mount towers run's excellent. just wanted the grunt of the big block. i'm located in northern massachusetts
