Fe motor mount help
Thread Starter
|
More Turbo
Joined: Feb 2004
Posts: 739
Likes: 11
From: Westfield, North Carolina
Fe motor mount help
Ok its not a truck problem, but maybe someone here has an idea. Im using a 64 block, that is going in a 65 galaxie, which had a 66 motor in it. The 66 block had a 3 bolt mount, would not work any way on the 64. So I worked on a set of two bolt truck mounts, but it set my engine 2 inches to far, so i ordered a set that was supposedly for a 64 block, but it set my block up even futher. So either I need the right mounts, or a 64 block wont swap in a 65 car without modification. Anyone done this or know which mounts to get. I know some 65's had to have 64 blocks, Ford didnt just make a whole new batch for em. Any help would be nice before i go looney , 
Thanks !
Thanks !
